Wall Signs Installation

ESSENTIAL TOOLS

• Velcro Hanging Strips

• Finishing Nails

• 3M Command Strips (x6 For The Large)

• Gorilla Mounting Tape

• Hammer

• Masking Tape

• We recommend using 3M command strips, gorilla mounting tape, or velcro hanging strips to hang your sign. You can also use a few small finishing nails into the wall, just under some of the loops in the sign's lettering (not through the cutout).

• Please note that your order does not include any hanging hardware or accessories.

Step 1

FIND THE PERFECT SPOT

Discover the perfect location for the sign on the wall. Make sure the wall surface is clean.

Step 2

ATTACH DOUBLE-SIDED TAPE OR 3M COMMAND STRIPS IN MANY SPOTS

Attach double-sided tape or 3M command strips at various points at the back of the sign (letters). Choosing a suitable tape is essential to secure the sign onto the wall.

Step 3

ALIGN THE SIGN ON THE WALL

Accurate alignment contributes to the overall aesthetics of the installation and ensures the sign's functionality and readability. Ensure the sign is aligned on the wall, and then remove the backing film from the tape. Lastly, apply pressure for at least 30 seconds to ensure a secure and durable hold.

Step 4

SECURE THE SIGN WITH NAILS

In the unlikely event that the adhesive tape or 3M command strips give way, use finishing nails under some of the loops in the sign's lettering, not through the cutout. This will offer a robust and reliable safety option.